we create your embedded solution
Hallo taskit-Team,
Wir haben den Adapter "BLE232" erhalten, leider ist es nicht möglich eine Verbindung zum BLE via Bluetooth herzustellen. Dabei spielt es keine Rolle, ob die Standardkonfiguration verwendet wird oder nicht. Dabei wurde mit verschiedenen Endgeräten getestet (Falls relevant: Galaxy S10+, Galaxy Tab A7, OnePlus 6, Windows PC's).
Aktuelle Einstellungen sind:
- BLE Role: Central
- ID: 10:24:51:20:85:85 (spielt diese eine Rolle?)
- Serial Setup: 9600, Paritiy: none, Stop bits: 1, XON/XOFF: off
Die Debug-Konsole gibt folgendes aus:
LE Central: 0xF8369B4B114C
DiscBLE Central: 0xF8369B4B114C
DiscBLE Central: 0xF8369B4B114C
DiscBLE Central: 0xF8369B4B114C
[...]
Ist evtl. eine externe Stromversorgung notwendig? Falls ja, muss diese über über alle Signale DCD,DSR,RST,... angeschlossen werden, oder ist einer dieser Anschlüsse ausreichend und müssen dort unbedignt Schottky-Dioden verwendet werden?
Hello taskit team,
We have received the adapter "BLE232", unfortunately it is not possible to connect to the BLE via Bluetooth. It does not matter whether the standard configuration is used or not. This was tested with different end devices (If relevant: Galaxy S10+, Galaxy Tab A7, OnePlus 6, Windows PC's).
Current settings are:
- BLE Role: Central
- ID: 10:24:51:20:85:85 (does this matter?)
- Serial Setup: 9600, Paritiy: none, Stop bits: 1, XON/XOFF: off
The debug console outputs the following:
LE Central: 0xF8369B4B114C
DiscBLE Central: 0xF8369B4B114C
DiscBLE Central: 0xF8369B4B114C
DiscBLE Central: 0xF8369B4B114C
[...]
Is an external power supply necessary? If so, must this be connected via all signals DCD,DSR,RST,...? or is one of these connections sufficient and must Schottky diodes be used there?